| Table of Contents | ||
|---|---|---|
|
...
Show More Columns: The ability to add columns in the view. If there are other columns that you think important to display on the module grid apart from the default view, then you can just select those columns to add them to the view.
Hide Columns: The ability to remove a column from view. If you do not want to include columns of less important on the module grid view, then remove column selection to hide those columns on the view.
Users can show/hide the Testing Type field in the Test Case module. If users want to use their own UDF instead of this field, they can hide it. The setting is provided in the Manage Fields section of the Customization module. Refer to Manage Fields for more details.
Re-arrange: The ability to arrange the columns in a different order through drag and drop functionality.
...
Users can easily filter test assets by any system/custom fields on all module grids. It also helps users in carrying out bulk operations. Filters placed horizontally above the grid earlier, are now placed on the tree panel at left.
Testers can view details grid aligned with folder tree even when they are clicking a folder which is at the bottom.
Apply Filter
Users can apply basic as well as advanced filters to the records.
...
Users can add images to any Large Rich Text Editor field (System as well as Custom) up to 1 MB. The images can be uploaded in the fields (A) by browsing and uploading the image (B) by inserting the image through the URL. It is applicable to all the fields across QMetry wherever rich text editor is available. The images will appear as thumbnails and will open as a full image on click.
Notes:
→ The supported file formats to upload are jpg, jpeg, png, and gif.
...
Click on the Edit icon at the right to open the source editor.
Note: To enable a rich text editor, the Enable Rich Text parameter should be enabled for the Project (Projects > Project / Release / Cycle). Refer to Enable Rich Text Editor for more details.
...
Testing Type: You can see this field on the test case detail page once a test case is created. The field shows how the test case was created in QMetry: Manual or Automated. If a test case is created through UI or imported from Excel, then it is identified as a manual test case. Test Cases that are created through Automation APIs are identified as Automated test cases. The Testing Type field remains read-only.
User Defined Fields: If UDFs are added for the test case module, then they are displayed on the Create Test Case screen and Test Case Details screen.
...
Enable Rich Text and Source Code Editor: Refer to the Description field aboveof test case.
Note: To enable rich text editor, the Enable Rich Text parameter should be enabled for the Project (Projects > Project / Release / Cycle). Refer to Enable Rich Text Editor for more details.
...
...
User Defined Fields: If UDFs are added to the test step module, then they are displayed on the Test Steps section as columns beside the default fields of test steps.
...
Show/Hide and Re-arrange Test Step Columns
You can organize the test steps columns in the panel through drag and drop operation. You can also opt to hide/show Input Data and , Expected Outcome and other UDF columns on the screen.
Click Save once you make any changes for the Test Steps panel.
...
2. Click in the cell to modify the steps. It opens the test case details page in editable mode. Just click the cell you want to edit the details of. Or
...
...
It allows you to do inline editing in the field.
...
As an alternate way, you can click on the Edit icon for the step that you want to edit.
...
The step section opens in the expanded view .You can switch between with system fields (Step Description, Input Data and Expected Outcome. To go back to the ) as well as custom fields.
You can switch between the fields.
...
In expanded view, the Large Text UDFs have separate tabs while all the other UDFs are combined in single tab named Other.
The Large Text type UDFs open in separate tabs for edit same as test step system fields.
...
Other tab: UDFs other than Large Text appear in a combined view, where you can edit the fields inline.
...
To go back to the Step Description section, click on the Move to Step button.
...
Once you are done with editing the test step, click Apply to save the changes.
...
Click on the cog icon.
It allows Actions on Cog icon
You can you to perform the following actions on the Steps grid:
...
It opens the field in editable mode. In case of text field, enter the value and save the details.
In-place edit will always update the test asset.
To create a new version of test asset, follow the steps mentioned below.
Edit Test Case Steps
1. Go to the test case detail page.
2. Open the Steps tab and click on the Edit button.
...
A. Edit Test Step Inline
After clicking on the Edit button, you can edit the step details inline.
...
B. Edit Steps in Expanded View
After clicking on the Edit button, the Edit icons and Update button become visible. Click on the Edit icon for the step you want to edit.
...
The step section opens in the expanded view.
You can switch between Step Description, Input Data and Expected Outcome. To go back to the Step Description section, click on the Move to Step button.
You can use the Previous Step and Next Step buttons to navigate to the previous/next steps.
Use the New Step button to add a new step next to the current step.
Once you are done with editing the test step, click Apply to save the changes.
, enter the value and save the details.
In-place edit will always update the test asset.
To create a new version of test asset, follow the steps mentioned below.
Edit Test Case Steps
Refer to the Edit entered steps section described earlier on this page.
Delete Test Case Steps
1. Go to the test case detail page.
...
On the Test Case Step(s) grid, click the Cog icon for the step you want to remove.
Select Remove Row.
Click Update.
→ Delete/Remove Test Steps in Bulk
...
Note: QMetry allows you to use different versions of a test case for testing. Read more about it on the Managing Test Case Versions page.
Archiving a Test Case
All the versions of the test case should be archived to delete that particular test case.
Archiving Entire Test Case
...
To delete a test case, first you need to archive it. All the versions of the test case should be archived to delete that particular test case.
It is a two step process:
...
Deleting Entire Test Case
All the versions of the test case should be archived to delete that particular test case.
A. From Test Case detail page
...
Open the Test Executions tab and Click on the Link Test Suites button. It opens Link Test Suites pop-up.
If you want to link test suites from multiple projects, then first select one project. Search records and link them before moving to other projects. For example, User A is in Project 1 and searches for some records and links them before moving to Project 2. Else, all the selection of Project 1 will be wiped off.
A. Linking a Single Test Suite: Click on the Link icon to link the individual test suite to the test case.
...
In case of eSignature feature:
eSignature in current Project | eSignature in Test Suite Project | Can test suites be linked with the test case? |
|---|---|---|
disabled | enabled | No (The Project drop-down on the Link Test Suite screen will only show those projects which have eSignature feature disabled) |
disabled | disabled | Yes |
enabled | enabled | Yes |
enabled | disabled | Yes |
If the eSignature feature is enabled in the Project -
Test Case Status | Can test suites of any project be linked with the test case? |
|---|---|
Approved | Yes |
In Review | No |
Link Test Suite Bulk Operations
...
Test Suites key will be ignored if relevant test suite with that key is not found.
If a single key is mentioned multiple times, it will be linked only once.
Archived test suites will be skipped from linking. Only unarchived version of entities will be linked.
Skip Duplicate Linkage is "On": If the test case is already linked with a test suite, then the linked test suite will be skipped. Only those test suites will be linked which are not yet linked with the test case version from where the linking is being performed.
Skip Duplicate Linkage is "Off": The test case version from where the test suite is being linked, that version will get linked to all the test suites.
Steps
1. Go to the Test Executions tab of the test case.
...
The following example shows the calculation of both – Execution Time and Remaining Time.
Execution time | Status | Remaining time | |
|---|---|---|---|
TC1 | 2 | Pass | - |
TC2 | 3 | Not Applicable | - |
TC3 | 4 | Failed | 4 |
TC4 | 5 | Blocked | 5 |
14 | 9 |
Execution Time = 14
Remaining Time = 9
...