How to map JIRA projects, Issue type and Fields with QMetry Project? (4) (4)

Map Jira Project & Issue Type with QMetry Project

Map Single Jira Project with QMetry Project 

These steps have to be performed in QMetry by Login as QMetry Project Admin : 

  1. Go to Projects > Project/Release/Cycle
  2. Open the Project > Jira Integration tab.
  3. Select the Jira URL with which this QMetry project mapping has to be done.
  4. Select the Jira project to configure with this QMetry Project.
  5. Once the Project is selected, select Issue Type <> QMetry Module associations. The issue type is a multi-select list. 
  6. Click on Save and Activate.






Map multiple Jira projects from a single Jira instance with one QMetry project

QMetry 8.5 allows multiple Jira projects to be configured with one QMetry project. Below are the steps for the same :

  1. Go to Projects > Project/Release/Cycle
  2. Open the Project > Jira Integration tab.
  3. Select the Jira URL with which this QMetry project configuration has to be done.
  4. Select the Jira project to configure with QMetry Project.
  5. Once the Project is selected, select Issue Type <> QMetry Module associations. The issue type is a multi-select list.
  6. Once the Jira Project is configured select another Jira project from the list and configure it the same way. This way you can select multiple Jira projects to integrate with one QMetry project.
  7. Click on Save and Activate. ("Update" if Jira integration was already Saved and Activated for the QMetry project)



Map multiple Jira projects from a multiple Jira instance with one QMetry project

QMetry 8.5 allows multiple Jira instances to be configured with one QMetry project. Below are the steps for the same :

  1. Go to Projects > Project/Release/Cycle
  2. Open the Project > Jira Integration tab.
  3. Select the Jira URL with which this QMetry project configuration has to be done.
  4. Configure the projects > Save and Activate the Integration.
  5. Once the Project is selected, select Issue Type <> QMetry Module associations. The issue type is a multi-select list.
  6. Select another Jira URL from the Jira Integration list. 
  7. Configure the projects > Save and Activate the integration.
  8. Once the Project is selected, select Issue Type <> QMetry Module associations. The issue type is a multi-select list.
  9. This way you can integrate multiple Jira instances with QMetry Project.


Configure Custom Jira fields for QMetry Module

QMetry displays default Jira issue fields in QMetry Modules. Project Admin can choose to display Jira custom fields as per project needs. Configuration of custom fields have to done separately for every configured Jira Project and Issue Type. Below are the steps : 

Note : Incase QMetry does not display a Jira field in the configuration screen - "Sync" project data to configure the field.


  1. Configure custom fields for Requirement and Issues.
  2. Sync Jira data to QMetry. For example, newly created custom Fields, etc.





Note : At least one of the Jira Project should be integrated with Issue Module. Once the Jira is integrated with QMetry project the internal issue module will be disappeared from the QMetry project.

Sync Requirements & Issues

Sync Requirements from Jira to QMetry

Once the Jira Project is configured with QMetry Project and Mapping of issue type with QMetry Requirement module is done. Requirements will be imported in Requirement module in Imported folder. Syncing of Jira fields is unidirectional i.e from Jira to QMetry. Once the requirements are imported only the QMetry fields can be edited, the Jira fields will be Read Only. 

 


Requirement detail screen displays below information of Jira issues :

  1. Jira Fields - System and Custom Fields
  2. Latest 10 Comments & Attachments from Jira issue.




Test case linkages to Requirement are shown in Jira on issue page under QMetry panel.



Sync Issues (Defects/Bugs) from Jira to QMetry

Once Jira Project is configured with QMetry Project and Mapping of issue type with QMetry Issue module is done. User can create a new issue from QMetry to Jira while executing test cases, link existing issues of Jira and view already linked issue. Issue can be linked to the Test case or Test case steps. 

Note : Once QMetry Project is integrated with Jira Project, QMetry internal Issue module would be hidden. 

Create Jira issues from Test suite execution window


Test case and Step details are automatically added to Issue Description



Test case Section in Jira will show the details of the Test case

Link existing Jira issues (already created) from the Test suite execution window



Test case Section in Jira will show the details of the Test case



View already linked/newly created issues on the Test suite execution window.